-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl ========================================================================
-dnl | BEGIN CODE FROM find_apr.m4 |
-dnl ========================================================================
-dnl
-dnl find_apr.m4 : locate the APR include files and libraries
-dnl
-dnl This macro file can be used by applications to find and use the APR
-dnl library. It provides a standardized mechanism for using APR. It supports
-dnl embedding APR into the application source, or locating an installed
-dnl copy of APR.
-dnl
-dnl APR_FIND_APR([srcdir [, builddir, implicit-install-check]])
-dnl
-dnl where srcdir is the location of the bundled APR source directory, or
-dnl empty if source is not bundled.
-dnl
-dnl where blddir is the location where the bundled APR will will be built,
-dnl or empty if the build will occur in the srcdir.
-dnl
-dnl where implicit-install-check set to 1 indicates if there is no
-dnl --with-apr option specified, we will look for installed copies.
-dnl
-dnl Sets the following variables on exit:
-dnl
-dnl apr_found : "yes", "no", "reconfig"
-dnl
-dnl apr_config : If the apr-config tool exists, this refers to it. If
-dnl apr_found is "reconfig", then the bundled directory
-dnl should be reconfigured *before* using apr_config.
-dnl
-dnl Note: this macro file assumes that apr-config has been installed; it
-dnl is normally considered a required part of an APR installation.
-dnl
-dnl If a bundled source directory is available and needs to be (re)configured,
-dnl then apr_found is set to "reconfig". The caller should reconfigure the
-dnl (passed-in) source directory, placing the result in the build directory,
-dnl as appropriate.
-dnl
-dnl If apr_found is "yes" or "reconfig", then the caller should use the
-dnl value of apr_config to fetch any necessary build/link information.
-dnl
-
-AC_DEFUN(APR_FIND_APR, [
- apr_found="no"
-
- if test "$ac_cv_emxos2" = "yes"; then
- # Scripts don't pass test -x on OS/2
- TEST_X="test -f"
- else
- TEST_X="test -x"
- fi
-
- AC_MSG_CHECKING(for APR)
- AC_ARG_WITH(apr,
- [ --with-apr=DIR|FILE prefix for installed APR, path to APR build tree,
- or the full path to apr-config],
- [
- if test "$withval" = "no" || test "$withval" = "yes"; then
- AC_MSG_ERROR([--with-apr requires a directory to be provided])
- fi
-
- if $TEST_X "$withval/bin/apr-config"; then
- apr_found="yes"
- apr_config="$withval/bin/apr-config"
- elif $TEST_X "$withval/apr-config"; then
- apr_found="yes"
- apr_config="$withval/apr-config"
- elif $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
- apr_found="yes"
- apr_config="$withval"
- fi
-
- dnl if --with-apr is used, then the target prefix/directory must be valid
- if test "$apr_found" != "yes"; then
- AC_MSG_ERROR([the --with-apr parameter is incorrect. It must specify an install prefix, a
-build directory, or an apr-config file.])
- fi
- ],[
- dnl if we have a bundled source directory, use it
- if test -d "$1"; then
- apr_temp_abs_srcdir="`cd $1 && pwd`"
- apr_found="reconfig"
- if test -n "$2"; then
- apr_config="$2/apr-config"
- else
- apr_config="$1/apr-config"
- fi
- fi
- if test "$apr_found" = "no" && test -n "$3" && test "$3" = "1"; then
- if apr-config --help > /dev/null 2>&1 ; then
- apr_found="yes"
- apr_config="apr-config"
- else
- dnl look in some standard places (apparently not in builtin/default)
- for lookdir in /usr /usr/local /opt/apr /usr/local/apache2 ; do
- if $TEST_X "$lookdir/bin/apr-config"; then
- apr_found="yes"
- apr_config="$lookdir/bin/apr-config"
- break
- fi
- done
- fi
- fi
- ])
-
- AC_MSG_RESULT($apr_found)
-])
-dnl
-dnl ========================================================================
-dnl | END CODE FROM find_apr.m4 |
-dnl ========================================================================
-
-# lib-prefix.m4 serial 4 (gettext-0.14.2)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/lib"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/lib"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/lib"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-# lib-link.m4 serial 6 (gettext-0.14.3)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ(2.50)
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- undefine([Name])
- undefine([NAME])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. If found, it
-dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- LIBS="$LIBS $LIB[]NAME"
- AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- undefine([Name])
- undefine([NAME])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE(rpath,
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib$1-prefix],
-[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
- --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/lib"
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
- found_dir="$additional_libdir"
- found_so="$additional_libdir/lib$name.$shlibext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- else
- if test -f "$additional_libdir/lib$name.$libext"; then
- found_dir="$additional_libdir"
- found_a="$additional_libdir/lib$name.$libext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
- found_dir="$dir"
- found_so="$dir/lib$name.$shlibext"
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- else
- if test -f "$dir/lib$name.$libext"; then
- found_dir="$dir"
- found_a="$dir/lib$name.$libext"
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */lib | */lib/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/lib"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/lib"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
- done
- dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-# lib-ld.m4 serial 3 (gettext-0.13)
-dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(acl_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
-
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-# Copyright 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.4-p6])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
- fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "[$]2" = conftestfile
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN([AM_MISSING_PROG],
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
-else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated. We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
- case " <<$>>CONFIG_HEADERS " in
- *" <<$>>am_file "*<<)>>
- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
- ;;
- esac
- am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 48 Debian 1.5.22-1 AC_PROG_LIBTOOL
+# serial 47 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
default_ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
if test -n "$RANLIB"; then
case $host_os in
openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
;;
*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
[pic_mode=default])
test -z "$pic_mode" && pic_mode=default
+# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
+#
+# Note: This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
+# We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
+# calls AC_LIBTOOL_CONFIG and creates libtool.
+#
+_LT_VERSION_CHECK
+
# Use C for the default configuration in the libtool script
tagname=
AC_LIBTOOL_LANG_C_CONFIG
])# AC_LIBTOOL_SETUP
+# _LT_VERSION_CHECK
+# -----------------
+AC_DEFUN([_LT_VERSION_CHECK],
+[AC_MSG_CHECKING([for correct ltmain.sh version])
+if test -z "$ltmain"; then
+ AC_MSG_RESULT(no)
+ echo
+ echo "*** [Gentoo] sanity check failed! ***"
+ echo "*** \$ltmain is not defined, please check the patch for consistency! ***"
+ echo
+ exit 1
+fi
+gentoo_lt_version="1.5.18"
+gentoo_ltmain_version=`grep '^[[:space:]]*VERSION=' $ltmain | sed -e 's|^[[:space:]]*VERSION=||'`
+if test "$gentoo_lt_version" != "$gentoo_ltmain_version"; then
+ AC_MSG_RESULT(no)
+ echo
+ echo "*** [Gentoo] sanity check failed! ***"
+ echo "*** libtool.m4 and ltmain.sh have a version mismatch! ***"
+ echo "*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***"
+ echo
+ echo "Please run:"
+ echo
+ echo " libtoolize --copy --force"
+ echo
+ echo "if appropriate, please contact the maintainer of this"
+ echo "package (or your distribution) for help."
+ echo
+ exit 1
+else
+ AC_MSG_RESULT(yes)
+fi
+])# _LT_VERSION_CHECK
+
+
# _LT_AC_SYS_COMPILER
# -------------------
AC_DEFUN([_LT_AC_SYS_COMPILER],
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_AC_SYS_COMPILER
AC_DEFUN([_LT_COMPILER_BOILERPLATE],
[ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
])# _LT_COMPILER_BOILERPLATE
AC_DEFUN([_LT_LINKER_BOILERPLATE],
[ac_outfile=conftest.$ac_objext
printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
])# _LT_LINKER_BOILERPLATE
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
+ case "`/usr/bin/file conftest.o`" in
*32-bit*)
case $host in
x86_64-*linux*)
rm -rf conftest*
;;
+*-*-linux*)
+ # Test if the compiler is 64bit
+ echo 'int i;' > conftest.$ac_ext
+ lt_cv_cc_64bit_output=no
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *"ELF 64"*)
+ lt_cv_cc_64bit_output=yes
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$SAVE_CFLAGS"
fi
;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
+ # The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
- #
+ #
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
fi
;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
*)
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# _LT_AC_CHECK_DLFCN
-# ------------------
+# --------------------
AC_DEFUN([_LT_AC_CHECK_DLFCN],
[AC_CHECK_HEADERS(dlfcn.h)dnl
])# _LT_AC_CHECK_DLFCN
# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
+# ------------------------------------------------------------------
AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
if test "$cross_compiling" = yes; then :
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
- else
- puts (dlerror ());
exit (status);
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ (./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
+ x$lt_unknown|x*) $3 ;;
esac
else :
# compilation failed
# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
+# -------------------
AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
if test "x$enable_dlopen" != xyes; then
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
])
if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ LDFLAGS="$LDFLAGS $link_static_flag"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_AC_TRY_DLOPEN_SELF(
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ chmod u+w .
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
esac
;;
+ linux*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+ if test $supports_anon_versioning = yes; then
+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ else
+ $archive_expsym_cmds="$archive_cmds"
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+ shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ *) # from 3.2 on
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
esac
;;
version_type=sunos
need_lib_prefix=no
need_version=no
- case $host_cpu in
+ case "$host_cpu" in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
postinstall_cmds='chmod 555 $lib'
;;
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
+ case $host_cpu:$lt_cv_cc_64bit_output in
+ powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+ sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+ ;;
+ esac
+
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
- ;;
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ # Find out which ABI we are using (multilib Linux x86_64 hack).
+ libsuff=
+ case "$host_cpu" in
+ x86_64*)
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *64-bit*)
+ libsuff=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+ *)
+ ;;
+ esac
+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
knetbsd*-gnu)
openbsd*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
need_lib_prefix=no
# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
solaris*)
version_type=linux
need_lib_prefix=no
need_version=yes
;;
-sysv4 | sysv4.3*)
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
fi
;;
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
fi
fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
# Extract list of available tagged configurations in $ofile.
# Note that this assumes the entire list is on one line.
# AC_LIBTOOL_WIN32_DLL
# --------------------
-# declare package support for building win32 DLLs
+# declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
# AC_DISABLE_SHARED
# -----------------
-# set the default shared flag to --disable-shared
+#- set the default shared flag to --disable-shared
AC_DEFUN([AC_DISABLE_SHARED],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
+ # but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
case $host_os in
darwin*)
if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
+ case "$host_cpu" in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
- esac
- ;;
-
-interix3*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ esac
;;
irix5* | irix6* | nonstopux*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method=pass_all
;;
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
-sysv4 | sysv4.3*)
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
siemens)
lt_cv_deplibs_check_method=pass_all
;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
esac
;;
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
esac
# Let the user override the test.
lt_cv_path_NM="$NM"
else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
break
;;
*)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
;;
esac
- fi
- done
- IFS="$lt_save_ifs"
+ esac
+ fi
done
+ IFS="$lt_save_ifs"
test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi])
NM="$lt_cv_path_NM"
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
+# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
+# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+# DIRECTORY is not provided and an installed libltdl is not found, it is
+# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!). If your package is not flat and you're not using automake,
+# define top_builddir and top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
])# _LT_AC_LANG_CXX
# _LT_AC_PROG_CXXCPP
-# ------------------
+# ---------------
AC_DEFUN([_LT_AC_PROG_CXXCPP],
[
AC_REQUIRE([AC_PROG_CXX])
# AC_LIBTOOL_RC
-# -------------
+# --------------
# enable support for Windows resource files
AC_DEFUN([AC_LIBTOOL_RC],
[AC_REQUIRE([LT_AC_PROG_RC])
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
+#
+# Check for any special shared library compilation flags.
+#
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+if test "$GCC" = no; then
+ case $host_os in
+ sco3.2v5*)
+ _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+ ;;
+ esac
+fi
+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+ AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+ if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then :
+ else
+ AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+ _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+ fi
+fi
+
+
+#
+# Check to make sure the static flag actually works.
+#
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+ $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+ [],
+ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+
+
AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
AC_LIBTOOL_PROG_COMPILER_PIC($1)
AC_LIBTOOL_PROG_CC_C_O($1)
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
+AC_LIBTOOL_DLOPEN_SELF($1)
-# Report which library types will actually be built
+# Report which librarie types wil actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case $host_os in
+case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_AC_TAGVAR(hardcode_automatic, $1)=no
_LT_AC_TAGVAR(module_cmds, $1)=
_LT_AC_TAGVAR(module_expsym_cmds, $1)=
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
-ac_ext=cpp
+ac_ext=cc
# Object file extension for compiled C++ test sources.
objext=o
lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
- $as_unset lt_cv_prog_gnu_ld
+ unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
- $as_unset lt_cv_path_LD
+ unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
;;
esac
done
- ;;
esac
exp_sym_flag='-bexport'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
fi
- ;;
esac
shared_flag='-shared'
if test "$aix_use_runtimelinking" = yes; then
_LT_AC_SYS_LIBPATH_AIX
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
# -berok will link without error, but may produce a broken library.
_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # -bexpall does not export symbols beginning with underscore (_)
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
# Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ # This is similar to how AIX traditionally builds it's shared libraries.
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
chorus*)
case $cc_basename in
*)
esac
;;
+
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
darwin* | rhapsody*)
- case $host_os in
+ case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
fi
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+ ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
;;
*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
esac
fi
- case $host_cpu in
- hppa*64*|ia64*)
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ ia64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
;;
*)
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ case "$host_cpu" in
+ ia64*|hppa*64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
;;
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
irix5* | irix6*)
case $cc_basename in
CC*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
;;
esac
;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
+ sco*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
sunos4*)
case $cc_basename in
CC*)
case $cc_basename in
CC*)
# Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- output_verbose_link_cmd='echo'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
;;
esac
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
;;
tandem*)
case $cc_basename in
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
AC_LIBTOOL_CONFIG($1)
])# AC_LIBTOOL_LANG_CXX_CONFIG
# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
+# ------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+ output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
for p in `eval $output_verbose_link_cmd`; do
case $p in
$rm -f confest.$objext
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix3*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
- ;;
- esac
- ;;
-esac
-])
-
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
])# AC_LIBTOOL_POSTDEP_PREDEP
# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
+# ------------------------
# Ensure that the configuration vars for the C compiler are
# suitably defined. Those variables are subsequently used by
# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case $host_os in
+case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
_LT_AC_TAGVAR(GCC, $1)="$G77"
_LT_AC_TAGVAR(LD, $1)="$LD"
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+
AC_LIBTOOL_CONFIG($1)
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
AC_LIBTOOL_CONFIG($1)
# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
+# --------------------------
# Ensure that the configuration vars for the Windows resource compiler are
# suitably defined. Those variables are subsequently used by
# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
SED SHELL STRIP \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
# A C compiler.
LTCC=$lt_LTCC
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
# A language-specific compiler.
CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
osf*)
symcode='[[BCDEGQRST]]'
;;
-solaris*)
+solaris* | sysv5*)
symcode='[[BDRT]]'
;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
sysv4)
symcode='[[DFNSTU]]'
;;
# DJGPP does not support shared libraries at all
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
;;
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case $host_cpu in
+ case "$host_cpu" in
hppa*64*|ia64*)
;;
*)
case $cc_basename in
CC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
if test "$host_cpu" != ia64; then
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
;;
esac
;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC*)
# Portland Group C++ compiler.
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
cxx*)
# Compaq C++
;;
esac
;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ netbsd*)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
;;
psos*)
;;
+ sco*)
+ case $cc_basename in
+ CC*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
solaris*)
case $cc_basename in
CC*)
;;
esac
;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
+ unixware*)
;;
vxworks*)
;;
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case $host_cpu in
+ case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case $host_cpu in
+ case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ pgcc* | pgf77* | pgf90*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ sco3.2v5*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+ ;;
+
solaris*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- sysv4 | sysv4.2uw2* | sysv4.3*)
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
unicos*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
-case $host_os in
+case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
;;
esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
])
cygwin* | mingw*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
- kfreebsd*-gnu)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
- linux*)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
with_gnu_ld=no
fi
;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
openbsd*)
with_gnu_ld=no
;;
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
-
+
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
-
+
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* ) # Portland Group f77 and f90 compilers
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
fi
;;
- solaris*)
+ solaris* | sysv5*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
_LT_AC_TAGVAR(ld_shlibs, $1)=no
cat <<EOF 1>&2
fi
;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
sunos4*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
break
fi
done
- ;;
esac
exp_sym_flag='-bexport'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
fi
- ;;
esac
shared_flag='-shared'
if test "$aix_use_runtimelinking" = yes; then
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
+ if test "$aix_use_runtimelinking" = yes; then
shared_flag='${wl}-G'
else
shared_flag='${wl}-bM:SRE'
- fi
+ fi
fi
fi
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
# -berok will link without error, but may produce a broken library.
_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # -bexpall does not export symbols beginning with underscore (_)
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
# Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ # This is similar to how AIX traditionally builds it's shared libraries.
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
;;
darwin* | rhapsody*)
- case $host_os in
+ case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
-
- # GNU/kFreeBSD uses gcc -shared to do shared libraries.
- kfreebsd*-gnu)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
hpux9*)
if test "$GCC" = yes; then
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
+ hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
+ case "$host_cpu" in
+ hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
;;
*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
;;
+ sco3.2v5*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ;;
+
solaris*)
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
if test "$GCC" = yes; then
fi
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ sysv4.2uw2*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
+ runpath_var='LD_RUN_PATH'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ sysv5*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
;;
uts4*)
AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
#
# Do we need to explicitly link libc?
#
libobjs=conftest.$ac_objext
deplibs=
wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
compiler_flags=-v
linker_flags=-v
verstring=
AC_MSG_RESULT([$SED])
])
-# Define a conditional.
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
-fi])
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+m4_include([acinclude.m4])